Changelogs for DVD Decrypter
Current version: v3.5.4.0
Changelog for v3.5.4.0 Added: Support for setting the read speed on AOpen 1648 DVDROM drives.
Changed: Creation of an MDS file is now only 'forced' when ripping to a FAT32 drive (like how it was in 3.5.2.0), rather than when also ripping a DL disc. A warning has been added to the 'Create MDS File' option in the settings instead.
Fixed: 'Layer Information' being shown in ISO Read mode when there was an empty DL disc in the drive - it shouldn't have been!
Fixed: Hang on some usb/firewire drives (enclosures).
Fixed: Error on some 'dummy' images mounted in DAEMON Tools - caused by non standard UDF file system.
Fixed: Start button still being enabled in File mode even when no files were found.
Fixed: Problem of the burn aborting if 'Lock Volume For Exclusive Access' failed silently with a 'known' error. People who experienced this problem should really just upgrade their IDE drivers.
Changelog for v3.5.3.0Added: Support for detection of newer / other forms of (possible) structure protection
Added: Support for removal of structure protection from IFO/BUP files
Added: 'Layer Information' to the info panels in ISO Read/Write modes
Added: Destination -> 'Capacity' + 'Free Space' labels now have tooltips that show the value in bytes (rather than KB as shown on the actual form)
Added: 'Application Identifier' to tooltip when you hover over the volume label in the 'Source' box
Added: 'Implementation Identifier' to tooltip when you hover over the volume label in the 'Source' box
Added: Workaround for drives connected via firewire that don’t support the real time streaming commands ('get performance' and 'set streaming' - these get / set the read / write speed)
Added: All burners are now issued a 'SET STREAMING' command when make them read at full speed - even when not specifically told to do so via the option in the settings
Added: A 'Quick OK' button to the 'Create MDS' file dialog
Added: Option of selecting SAO or Packet/Incremental for 'Write Type'
Added: Option to enabled / disable the OS wide 'Autorun' property for CDROM drives
Added: Support for PSL v2.0 (Import + Export)
Added: Aborting the decryption process whilst the drive is doing read retries now displays the error the drive finally comes back with
Added: Workaround for AOpen drives that wont authenticate sometimes
Added: Select IFO, BUP, VOB to 'Edit' menu in File mode
Added: 'Recording Management Area Information' to ISO Read / Write info screens. Displays (where supported), which drive burn the DVD-R / DVD-RW media in the drive
Added: Support for split (i.e. FAT32) NRG files
Added: '.CDI' type images to the list of supported image types
Added: Option to enabled / disable 'Plextor SpeedRead DVD' via the Tools -> Drive menu (+ right click context menu on drive drop down box)
Added: Support for a 3rd variation of bit setting on LiteOn drives
Added: 'Ignore Unreferenced VTS Sets' to File mode settings
Added: 'Uncheck Suspect Cells' to IFO mode settings (on by default)
Added: Ability to hide pack header warnings in 'structure protected' areas
Added: Option of specifying chapters for IFO mode via '/CHAPTERS' in CLI mode
Added: Option to cycle the tray once dummy sectors have been inserted due to a protected disc
Added: Option within the Installer to create shortcuts for all users, not just the current one
Added: All the items from the 'Device' context menu to a new 'Drive' submenu in the 'Tools' menu
Changed: Structure protection detection code works with AnyDVD now and won't report protection that AnyDVD (or other programs) has removed
Changed: Updated Patin-Couffin code to use latest IOCTLs - faster and cleaner now
Changed: Tweaking of Authentication -> GetTitleKey routines
Changed: Program update code to work better for people who use a proxy to connect to the internet
Changed: Patin-Couffin interface now displays SrbStatus too in I/O Error dialog
Changed: The program no longer cares if the GetASF function fails
Changed: All I/O is now sent in a properly alligned (by the VirtualAlloc API) buffer
Changed: The Drive Ready -> Not Ready code to force a dismount of the volume when using SPTI as the I/O Interface
Changed: Tweaked Plextor bitsetting code
Changed: Program update code now looks for an internet connection before attempting to open a connection to the update servers
Changed: Program update code now looks for and attempts to use the IE proxy settings before then attempting a direct connection to the update servers
Changed: Volume Label changing code has been updated to use additional UDF descriptor values to know how much to scan for File Set Descriptors
Changed: 'Enable/Disable Regional Code' code for LiteOn drives - now supports more drives
Changed: Cell 'layer' property (used in 'By Layer' file splitting) is now calculated via the real media layer break instead of the 'seamless playback linked in PCI' flag of the cell in the IFO file
Changed: Max buffer size from 128MB to 256MB
Changed: Now issuing 3 different 'Set write speed' commands, using slightly different values for each
Changed: Loading ISO images when an MDS file exists no longer causes the program to tell the user to load the MDS file if the image is < 4,700,000,000 bytes in size
Changed: Code to work out the best 'Transfer Length' value
Changed: When 'Software Write Error Retries' is anything other than 0, the initial error is now saved and then displayed in the I/O Error dialog box after retries have been exhausted
Changed: Full erase (format) on DVD+RW discs now waits for the entire (foreground + background) process to finish before saying it's complete
Changed: The 'Open File' type dialog boxes are now created with an additional flag to make them check the file exists before letting you click 'Ok' and then them closing
Changed: Entries in the list box in File mode are now sorted by VTS set, with IFO first within a set, then VOB then BUP
Changed: Installer now checks to see if DVDDecrypter.exe is running before attempting the installation
Changed: Default sectors to search for CSS in Brute Force mode is now 500
Changed: ISO Write mode no longer sends a modified Write Parameters page to the drive when using plus format media
Changed: All 'Read' modes now put 'Extracting Sectors...' in the log having completed 'Inserting Dummy Sectors (x - y)...'
Changed: The drive locking code will no longer error out if the error code is 'Invalid Function'
Changed: 'Structure Protection' detection code to hopefully pick up less 'false positives'
Changed: Handling of bad sector areas as part of the structure protection code
Changed: Some of the AutoPlay integration code for XP / 2003 etc
Changed: MDS file association is now on by default
Changed/Fixed: 'Rename' is now the default button (rather than 'Yes') in the 'This file already exists, do you want to overwrite it?' dialog box
Fixed: A file could have its 'Handle' left open if doing a DL disc that made use of 'calculate optimal' for the layer break
Fixed: ElbyCDIO interface could report incorrect SenseArea info
Fixed: ElbyCDIO interface errors (non CDB command ones) could have been misreported
Fixed: Access violation when a chapter in the IFO said it used cells that didn't exist
Fixed: (workaround for a) problem with authentication on some Asus DVDROM drive with v1.07 firmware when a certain file wasn't encrypted
Fixed: Access violation if you close the program while the program is searching for devices
Fixed: Potential access violation due to 'PlaySound' API being limited to 256 characters in the file name
Fixed: Got 'Minimize to system tray' working on system menus in Windows 95
Fixed: Windows 'please reinsert the disc' message once the disc has been ejected and before the 'Operation Successfully Completed!' sound/message
Fixed: Problems with LiteOn DVDROM drives that misbehaved and gave random pack header errors and failed to patch ifo/bup errors (maybe only a USB issue)
Fixed: Problem with using 'cut' on log entries
Fixed: Switching to the LiteOn tab in the booktype setting dialog issued commands that weren't used / needed
Fixed: Potential problem where some drives would show 'Unknown' for 'Current Profile' due to some error catching code that caught errors that weren't really there
Fixed: Workaround for Change volume label 'hang' on Nero UDF and UDF/ISO data images that don't have a 'Terminating Descriptor' after the 'File Set Descriptor'
Fixed: Made sure you can't switch program modes while another switch is taking place - this was possible before (if you had mega quick fingers) and crashed the program
Fixed: NEC temporary bitsetting wasn't allowed unless another program had already set it for that media type
Fixed: Devices drop down list staying disabled if user experiences 'Device Wouldn't Open!' error message
Fixed: Infinite retry loop in the 'GetFileSize' function - only happened when the API command failed
Fixed: Some of the 'Save' dialog boxes didn't force a file extension to be added to the file name if one wasn't specified
Fixed: A minor issue where under certain circumstances, selecting 'Rename' in the 'file already exists' dialog box wouldn't create the 'destination file has been renamed to xxxx' entry in the log
Fixed: A bug (but not really a bug as the code didn't exist before!) with some drives that show blank media as having a status of 'Incomplete' instead of 'Empty' but then had a session status of 'blank' - this IS allowed, but very rare - hence why I'd not
Fixed: Strange 'jumping' when the log window is resized using the top bar
Fixed: Windows NT 4 ALWAYS saying I should have selected the MDS file rather than the ISO, even when one didn't exist
Fixed: A problem with 0 byte files and Start LBA addresses of 0 messing things up in ISO Read mode
Fixed: Bug in the program update code that would mean it still tried (and retried) every link (3 of them), even if you were trying to exit the program - would lead to a 'Waiting for Program Update Thread' message in the status bar for days on end
Fixed: A bug in the function called by specifying '/chapters' as a CLI option
Fixed: Bug in volume label changing code (UDF filesystem) that would mean a longer name would get truncated by windows when displayed in 'My Computer' etc
Fixed: (I think) a problem where the program could get stuck reading as a result of the 'structure protection' code combined with a real read error in a certain place Changelog for v3.5.2.0Added: Support for different/newer types of 'structure protection'
Added: Support for NEC (new style), Plextor and AOpen (use RICOH tab) Bitsetting
Added: Option to not display the dialog box about loading the MDS and not the ISO
Added: Support for running on multimonitor displays
Changed: Burn engine to relieve stress (caused by a fast executing 'While' loop) on the I/O subsystem when doing the 'Lead-In' stage of the burn
Changed: Window snapping so that it snaps on the middle of the screen and not just at the edges
Changed: 'SetWriteParameters' function to attempt to use the drive specified 'link size'
Changed: Write retries have been reintroduce (old default = 0, new = 20)
Changed: Drag + Drop code enabled / disabled at different times to help prevent some subclassing problems due to ThemeManager - could cause access violations on some PCs when the app is closed
Changed: Added another URL to the 'check for program update' code
Changed: Behaviour of 'Browse' dialog for ISO Write source files
Changed: volume label change code to support split image where the backup volume descriptor is at the end of the disc
Fixed: A bug in the 'check for program update' code that could mean 1 failure causes all the retries to fail too
Fixed: UDF volume label changing code to recalculate descriptor CRC + checksum
Fixed: Major slow down on some 'structure protected' discs
Fixed: A problem with some DVDRAM discs, reading them to images and trying to change the volume label
Changelog for 3.5.1.0Changes in 3.5.1.0:
Added: Ability to Import / Export PSL (Protected Sectors List) files (Option is located in the 'File' menu)
Added: Dialog box to remind users to load the MDS file instead of the ISO file
Changed: Structure Protection code to find more instances of 'suspect' areas on the disc
Changed: Some of the Automatic 'Transfer Length' code
Changed: Previous workaround for Plextor PX-712A authentication problem caused problems for old drives that hang on a 'Rezero' command (Status bar always displayed 'Almost Ready')
Fixed: Access violation errors caused by nasty IFO files on some of the newer discs
Fixed: 'Browse' was always visible in the 'File' menu
Fixed: Potential issue with getting the disc size from the ISO9660 file system (only used in ISO Read mode on DVD+RW discs)
Fixed: 'Cracking CSS' dialog box showed very inaccurate progress information
Fixed: CSS cracking was repeating itself on files it shouldn't have been
|
 |
|
|
|
