TRIED TO COPY BATMAN BEGINS AND THE COPY WILL NOT PLAY

SDSPARK58 · Newbie Joined: 05 Nov 2005 Posts: 3

I HAVE USED DVD XCOPY PLATINUM FOR THE PAST YEAR NO PROBLEMS ON THIS SAME PC SETUP.I AM RUNNING DVD 43,PUT THE MEDIA TO COPY IN DVD DRIVE RAN COPY TO DVD IT RAN,EJECTED DISK, SAID PUT IN BLANK MEDIA,I PUT IN A DVD-R, IT SAID IT WAS COPING,EJECTED DISK,AND SAID COPY COMPLETE......

Cougar_II · Posted: Sun Nov 06, 2005 2:47 am Post subject:

Hi and welcome to forum. Please turn off your caps. it's considered shouting and inpolite ! What brand of media are you using (What's important is the Media ID). VSO Inspector can provide that to you, or look at your CopyToDVD.LOG What speed are you burning those ? Cheap media and burned too fast will cause playback issues... Can you play the DVD (Video_TS) directory on your computer ? If it's the case, the problems occured after burning !

SDSPARK58 · Newbie Joined: 05 Nov 2005 Posts: 3

Ok i was using tdk 8X compatible dvd-r47wdc100tp , witch i tried a couple of times with no sucess(these are the only dvd's i used with dvdxcopy platium, they always worked great) then i used a sony dvd-r ver.2.0/1x_8x and it seamed to work fine. I guess what i dont get now is why wont the tdk dvd's work? TDK is good media, right? i have 200 of these tdk dvd-r's but i cant get my dvdxcopy working becouse it want me to re_register it and it says already registered 7 times for some reason. i have only regestered it 1.

SDSPARK58 · Newbie Joined: 05 Nov 2005 Posts: 3

where do i find media id?

Cougar_II · Posted: Thu Nov 10, 2005 11:45 am Post subject:

Hi there, You can find your media id in C2CD.LOG (CopyToDVD) or by using VSO Inspector v1.1 which will display you the media id of your blank media. CMC Mag. are probablythe worste media on the market. http://www.videohelp.com/dvdmedia Go here to check what others say about your media. Most TDK DVD-R 8x seems ok, it's the 4x that seems to be problematics.

CDR-Zone.COM · Advertisement Bot